The metal rails found on each side of the garage door are the tracks. These are actually the vertical garage door tracks and are connected to the horizontal tracks – which run along the ceiling – with the curved tracks.The tracks may differ in size to suit low headroom, standard, and high-lift garage doors. Although they may also differ in material, most tracks are made of stainless steel – the lower the gauge steel, the more durable the tracks. That’s important, especially in locations with high winds and storms. In such cases, the fasteners that hold the tracks in place are even bigger and more durable. That’s one main feature of wind-load garage doors.
This was a short introduction about garage door tracks. It was important to sketch the profile of tracks to pinpoint the urgency of their problems. You see, the tracks provide housing for the garage door rollers. If something would happen to the tracks, the rollers would stop or come off. And the garage door off track is not only an eye-sore but also a major safety consideration. Mind you, this is not the only thing that may go wrong with the tracks. Sit tight to explore the possible track issues to understand their importance and know what to do.
The tracks become misaligned when they are suddenly hit by a heavy object or their fasteners are loose. In this case, the garage door shakes when it moves and might also come off or get jammed. Tracks must be adjusted. But aligning tracks is very difficult since there’s some calculations to make to keep the right distances from the door. If not, the possibility of the garage door binding or jamming is high. It’s best to find a garage door repair tech.
Tracks bend when they are hit. The damage might be limited to a few dents or extended to a severe problem. Severely damaged garage door tracks should be replaced. If the dents have exposed the raw part of the steel, it will gradually corrode. So, you might still consider the replacement of the tracks if the problem is serious. Bent tracks can be fixed. But don’t try this yourself. The bent garage door track repair must be done with the right tools or you might inflict more damage than do good.
Believe it or not, dirt and debris can affect the performance of garage door tracks and rollers. The hollow part of the tracks can easily clutter with the elements. Since the rollers are lubed, the residue combined with the elements will make an awful mix that might obstruct the movement of the garage door. It’s vital to keep the tracks clean at all times.
Sometimes, you face track problems by association. That’s when there’s a problem with the rollers. Since the rollers sit in the tracks and use the tracks as the rail to go up and down, their damage might affect the tracks. Nylon rollers are more resistant and will hardly affect the tracks. But if the rollers are made of steel, there might become damaged at one point and so, scratch the tracks. If you hear noises, don’t ignore them. Check both the rollers and the tracks.
Incorrect garage door track repair
Some problems occur when the necessary garage door tracks repair is not done correctly. Take the tracks adjustment we already talked about, for example. Or consider the possibility of having the tracks installed in the wrong way or their bent sections improperly fixed. The failure to fix problems correctly will give birth to more problems. So, make sure you entrust all track services to a professional garage door company to have peace of mind.