If you think it’s far stretched to check the electric garage door opener monthly, think of your kids and their safety. Think of the money you have invested in your garage door and your car. Think of your own safety and your convenience. The initial purpose of electric openers is to allow you to move the garage door automatically. Although this is a fact, it is also ancient history. Automatic openers were initially produced for this purpose and still today this is their basic mission but we have come a lot way since the very first operators. Today, they don’t only ensure the door will move with electric power but they will also move without power. They also guarantee safety and make sure the door will open and close all the way. All these things affect your daily life and convenience, have an impact on the security of your home in Toronto and determine your safety. Do you still think it’s senseless to check them monthly?
Fundamental opener maintenance steps
It’s not hard checking the opener. Of course, if you need assistance, Homeland garage Toronto is always at your service. Openers are made to ensure safety and for this reason they have a reverse mechanism. When the door comes in contact with an object, it automatically reverses. So, place a small object or a piece of cardboard on the floor and see if the door reverses the minute it comes in contact with the object. Keep in mind that the door must be balanced in order for the reverse system to work properly. In order to check the photo eyes, pass your hand under the door as it is descending. It should automatically reverse or stop without coming in contact with your hand. It is possible that the sensitivity of the reverse system is not well-adjusted. You will know that by holding the door from its bottom part as it comes down. It should reverse.
If the garage door doesn’t reverse during these tests, the opener safety features need repairs. The lights on the sensors ought to be on at all times and the two devices must be properly adjusted to face each other; otherwise, they won’t see the obstruction. Sometimes, the fasteners of the sensors get loose and the photo eyes are misaligned. This is easily fixed by adjusting them and tightening the screws. If one of the opener lights is off, replace it. If the fasteners of the opener unit or the trolley are loose, tighten them. These small tasks will keep you safe!